Skip to main content
Version: 2.2.3

Simulate Disk Faults

This document describes how to use Chaosd to simulate disk faults. This feature helps you simulate disk read/write load (via dd) or disk fill (via dd or fallocate).

Create experiments using the command-line mode

This section describes how to create disk fault experiments using the command-line mode.

Before creating an experiment, you can run the following command to check the types of disk faults that are supported by Chaosd:

chaosd attack disk -h

The result is as follows:

disk attack related command

Usage:
chaosd attack disk [command]

Available Commands:
add-payload add disk payload
fill fill disk

Flags:
-h, --help help for disk

Global Flags:
--log-level string the log level of chaosd, the value can be 'debug', 'info', 'warn' and 'error'

Use "chaosd attack disk [command] --help" for more information about a command.

Currently, Chaosd supports creating disk read load experiments, disk write load experiments, and disk fill experiments.

Simulate disk read load using the command-line mode

Simulating disk read load is a one-time operation, so the experiment does not need to be recovered.

Commands for simulating disk read load

chaosd attack disk add-payload read -h

The result is as follows:

read payload

Usage:
chaosd attack disk add-payload read [flags]

Flags:
-h, --help help for read
-p, --path string 'path' specifies the location to read data.If path not provided, payload will read from disk mount on "/"
-n, --process-num uint8 'process-num' specifies the number of process work on reading , default 1, only 1-255 is valid value (default 1)
-s, --size string 'size' specifies how many units of data will read from the file path.'unit' specifies the unit of data, support c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000,M=1024*1024, , GB=1000*1000*1000, G=1024*1024*1024 BYTESexample : 1M | 512kB

Global Flags:
--log-level string the log level of chaosd, the value can be 'debug', 'info', 'warn' and 'error'

Configuration description for simulating disk read load

Configuration itemAbbreviationDescriptionValue
pathpSpecifies the file path to read the data. If this parameter is not specified, or the parameter value is set to an empty string, Chaosd reads from the virtual disk files mounted in the "/" directory. Depending on the permissions to read the files, you might be required to run this program using certain permissions.type: string; default: ""
process-numnSpecifies the number of concurrently running dd programs to be used.type: uint8; default: 1; range: 1 to 255
sizesSpecifies the volume of data to be read. It is the total size of data that <0>dd</0> reads.type: string; default: ""; required; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on.

Example for simulating disk read load

chaosd attack disk add-payload read -s 1000G -n 7 -p /dev/zero

The result is as follows:

andrew@LAPTOP-NUS30NQD:~/chaosd/bin$ ./chaosd attack disk add-payload read -s 1000G -n 7 -p /dev/zero
[2021/05/20 13:54:31.323 +08:00] [INFO] [disk.go:128] ["5242880+0 records in\n5242880+0 records out\n5242880 bytes (5.2 MB, 5.0 MiB) copied, 4.13252 s, 1.3 MB/s\n"]
[2021/05/20 13:54:46.977 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.6513 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.002 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.6762 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.004 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.6777 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.015 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.6899 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.018 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.6914 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.051 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.7254 s, 9.8 GB/s\n"]
[2021/05/20 13:54:47.074 +08:00] [INFO] [disk.go:147] ["146285+0 records in\n146285+0 records out\n153390940160 bytes (153 GB, 143 GiB) copied, 15.7487 s, 9.7 GB/s\n"]
Read file /dev/zero successfully, uid: 4bc9b74a-5fe2-4038-b4f2-09ae95b57694

Simulate disk write load using the command-line mode

Command for simulating disk write load

chaosd attack disk add-payload write -h

The result is as follows:

write payload

Usage:
chaosd attack disk add-payload write [flags]

Flags:
-h, --help help for write
-p, --path string 'path' specifies the location to fill data in.If path not provided, payload will write into a temp file, temp file will be deleted after writing
-n, --process-num uint8 'process-num' specifies the number of process work on writing , default 1, only 1-255 is valid value (default 1)
-s, --size string 'size' specifies how many units of data will write into the file path.'unit' specifies the unit of data, support c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000,M=1024*1024, , GB=1000*1000*1000, G=1024*1024*1024 BYTESexample : 1M | 512kB

Global Flags:
--log-level string the log level of chaosd, the value can be 'debug', 'info', 'warn' and 'error'

Configuration description for simulating disk write load

Configuration itemAbbreviationDescriptionValue
pathpSpecifies the file path to write the data. If this parameter is not specified, or the parameter value is set to an empty string, a temporary file will be created in the program execution directory. Depending on the permissions to write the files, you might be required to run this program using certain permissions.type: string; default: ""
process-numnSpecifies the number of concurrently running dd programs to be used.type: uint8; default: 1; range: 1 to 255
sizesSpecifies the volume of data to be written. It is the total size of data that <0>dd</0> writes.type: string; default: ""; required; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on.

Example for simulating disk write load

chaosd attack disk add-payload write -s 2G -n 8

The result is as follows:

[2021/05/20 14:28:14.452 +08:00] [INFO] [disk.go:128] ["0+0 records in\n0+0 records out\n0 bytes copied, 4.3e-05 s, 0.0 kB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.32841 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.3344 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.33312 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.33466 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.33189 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.33752 s, 115 MB/s\n"]
[2021/05/20 14:28:16.793 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.33295 s, 115 MB/s\n"]
[2021/05/20 14:28:16.794 +08:00] [INFO] [disk.go:147] ["256+0 records in\n256+0 records out\n268435456 bytes (268 MB, 256 MiB) copied, 2.3359 s, 115 MB/s\n"]
Write file /home/andrew/chaosd/bin/example255569279 successfully, uid: e66afd86-6f3e-43a0-b161-09447ed84856

Simulate disk fill using the command-line mode

Command for simulating disk fill

chaosd attack disk fill -h

The result is as follows:

fill disk

Usage:
chaosd attack disk fill [flags]

Flags:
-d, --destroy destroy file after filled in or allocated
-f, --fallocate fill disk by fallocate instead of dd (default true)
-h, --help help for fill
-p, --path string 'path' specifies the location to fill data in.If path not provided, a temp file will be generated and deleted immediately after data filled in or allocated
-c, --percent string 'percent' how many percent data of disk will fill in the file path
-s, --size string 'size' specifies how many units of data will fill in the file path.'unit' specifies the unit of data, support c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000,M=1024*1024, , GB=1000*1000*1000, G=1024*1024*1024 BYTESexample : 1M | 512kB

Global Flags:
--log-level string the log level of chaosd, the value can be 'debug', 'info', 'warn' and 'error'

Configuration description for simulating disk fill

Configuration itemAbbreviationDescriptionValue
destroydIf this parameter is set to true, the fill file is immediately deleted after being filled.type: bool; default: false
fallocatefIf this parameter is set to true, Linux is used to call fallocate to quickly apply for disk space and size must be greater than 0. If this parameter is set to false, Linux is used to call dd to fill disks at a relatively slow pace.type: bool; default: true
pathpSpecifies the file path to write the data. If this parameter is not specified, or the parameter value is set to an empty string, a temporary file will be created in the program execution directory. Depending on the permissions to write the files, you might be required to run this program using certain permissions.type: string; default: ""
percentcSpecifies the percentage of disk size to be filled.type: string; default: ""; positive integer of the uint type is acceptable; You must set one of size or percent (both items cannot be "" at the same time).
sizesSpecifies the volume of data to be written.type: string; default: ""; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on. You must set one of size or percent (both items cannot be "" at the same time).

Example for simulating disk fill

chaosd attack disk fill -c 50 -d

The result is as follows:

[2021/05/20 14:30:02.943 +08:00] [INFO] [disk.go:215]
Fill file /home/andrew/chaosd/bin/example623832242 successfully, uid: 097b4214-8d8e-46ad-8768-c3e0d8cbb326

Create experiments using the service mode

This section describes how to create disk fault experiments using the service mode.

Simulate disk read load using the service mode

Simulating disk read load is a one-time operation, so the experiment does not need to be recovered.

Parameters for simulating disk read load

ParameterDescriptionValue
actionActions of the experimentSet to "read-payload"
pathSpecifies the file path to read the data. If this parameter is not specified, or the parameter value is set to an empty string, Chaosd reads from the virtual disk files mounted in the "/" directory. Depending on the permissions to read the files, you might be required to run this program using certain permissions.type: string; default: """
payload-process-numSpecifies the number of concurrently running dd programs to be used.type: uint8; default: 1; range: 1 to 255
sizeSpecifies the volume of data to be read. It is the total size of data that <0>dd</0> reads.type: string; default: ""; required; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on.

Example for simulating disk read load using the service mode

curl -X POST 172.16.112.130:31767/api/attack/disk -H "Content-Type:application/json" -d '{"action":"read-payload","path":"/dev/zero", "payload-process-num":7,"size":"1000G"}'

The result is as follows:

{"status":200,"message":"attack successfully","uid":"a551206c-960d-4ac5-9056-518e512d4d0d"}

Simulate disk write load using the service mode

Parameters for simulating disk write load

ParameterDescriptionValue
actionActions of the experimentSet to "write-payload"
pathSpecifies the file path to write the data. If this parameter is not specified, or the parameter value is set to an empty string, a temporary file will be created in the program execution directory. Depending on the permissions to write the files, you might be required to run this program using certain permissions.type: string; default: ""
payload-process-numSpecifies the number of concurrently running dd programs to be used.type: uint8; default: 1; range: 1 to 255
sizeSpecifies the volume of data to be written. It is the total size of data that <0>dd</0> writes.type: string; default: ""; required; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on.

Example for simulating disk write load using the service mode

curl -X POST 172.16.112.130:31767/api/attack/disk -H "Content-Type:application/json" -d '{"action":"write-payload","path":"/tmp/test", "payload-process-num":7,"size":"1000G"}'

The result is as follows:

{"status":200,"message":"attack successfully","uid":"a551206c-960d-4ac5-9056-518e512d4d0d"}

Simulate disk fill using the service mode

Parameters for simulating disk fill

ParameterDescriptionValue
actionActions of the experimentSet to "fill"
destroyIf this parameter is set to true, the fill file is immediately deleted after being filled.type: bool; default: false
fill-by-fallocateIf this parameter is set to true, Chaosd uses Linux to call fallocate to apply for disk space quickly, and you must set size to a value greater than 0. If this parameter is set to false, Chaosd uses Linux to call dd to fill disks at a relatively slow pace.type: bool; default: true
pathSpecifies the file path to write the data. If this parameter is not specified, or the parameter value is set to an empty string, a temporary file will be created in the program execution directory. Depending on the permissions to write the files, you might be required to run this program using certain permissions.type: string; default: ""
percentSpecifies the percentage of disk size to be filled.type: string; default: ""; positive integer of the uint type is acceptable; You must set one of size or percent (both items cannot be "" at the same time).
sizeSpecifies the volume of data to be read.type: string; default: ""; legal form: the combination of an integer and a unit. For example, 1M, 512kB. Supported units are c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, GB=1000*1000*1000, G=1024*1024*1024*1024 BYTE and so on. You must set one of size or percent (both items cannot be "" at the same time).

Example for simulating disk fill using the service mode

curl -X POST 172.16.112.130:31767/api/attack/disk -H "Content-Type:application/json" -d '{"action":"fill","path":"/tmp/test", "fill-by-fallocate":true,"percent":"50"}'

The result is as follows:

{"status":200,"message":"attack successfully","uid":"a551206c-960d-4ac5-9056-518e512d4d0d"}